BlueDot BME280+TSL2591 Advanced Weather Station

This tiny boards brings two great sensors together: while the TSL2591 allows you to measure illuminance, the BME280 sensor measures temperature, humidity, pressure and altitude. What else do you need for your weather station?

 

Here are 5 features that make the BlueDot BME280+TSL2591 such a great board:

  • Light, Temperature, Humidity, Pressure and Altitude Measurements
  • BlueDot Library for Arduino with Examples
  • 3.3V and 5V Power Supply
  • I2C Communication
  • Data Transfer with both 5V and 3.3V devices 

BlueDot BME280+TSL2591 Advanced Weather Station

 

Board Power Supply:   2.6V to 5.5V

Communication:   I2C

Board Size:   26 x 19 x 2 mm

Delivery Contents:   One board and one 6 pin header 

21,99 €

  • Limited Availability
  • Ships within 1-3 days1


BlueDot BNO055 9-Axis IMU

The BNO055 absolute orientation sensor is an amazing device. It integrates an accelerometer, a gyroscope,  a geomagnetic sensor and a 32-bit microcontroller in a single package. Not only can you read the sensors at the same time, but a fusion algorithm running on the on-board microcontroller analyzes all the measured data and calculates the orientation of the device in space.

 

Here are 5 features that make the BlueDot BNO055 9-Axis IMU such an amazing board:

  • Magnetic Field, Acceleration and Angular Rate Measurements
  • Fusion Algorithms
  • 3.3V and 5V Power Supply
  • I2C Communication
  • Data Transfer with both 5V and 3.3V devices 

BlueDot BNO055 9-Axis IMU

 

Board Power Supply:   2.6V to 5.5V

Communication:   I2C

Board Size:   30 x 19 x 2 mm

Delivery Contents:   One board and one 10 pin header 

26,99 €

  • Sold Out


BlueDot BME680 Environmental and Gas Sensor

The BlueDot BME680 Environmental and Gas Sensor not only allows you to measure temperaturehumiditypressure and altitude with an Arduino, but with the integrated Metal Oxide (MOX) Gas Sensor you can measure volatile organic compounds (VOCs) in the air. The Metal Oxide-based sensor detects VOCs by adsorption on its sensitive layer and its resistance changes with the VOC concentration (the higher the VOC concentration, the lower the output resistance and vice-versa). The raw-signal is therefore a resistance value in ohms.

 

Volatile organic compounds are typically found in building materials, printers, solvents, paints, gasoline and many household products. The long-term exposure to VOCs can be harmful to our health and since we spend so much time indoors (homes and offices), it is important to find the source and reduce the concentration of VOCs in indoor environments.

 

The BME680 sensor is the most recent development from Bosch Sensortec, the world's leading manufacturer of MEMS (Micro Electromechanical Systems).

BlueDot BME680 Environmental and Gas Sensor

 

Board Power Supply:   2.6V to 5.5V

Communication:   SPI and I2C

Board Size:   26 x 19 x 2 mm

Delivery Contents:   One board and one 6 pin header 

21,99 €

  • Sold Out

BlueDot BME280 Weather Station


The BlueDot BME280 Weather Station is the best way to measure temperaturehumiditypressure and altitude with an Arduino. Being developed for mobile applications, the BME280 sensor from BOSCH combines high precision and low power consumption in a very small package.

 

Here are 5 features that make the BlueDot BME280 Weather Station very easy to use:

  • Temperature, Humidity, Pressure and Altitude Measurements
  • 3.3V and 5V Power Supply
  • SPI and I2C Communication
  • Data Transfer with both 5V and 3.3V devices 
  • BlueDot BME280 Library for Arduino

BlueDot BME280 Weather Station

 

Board Power Supply:   2.6V to 5.5V

Communication:   SPI and I2C

Board Size:   26 x 19 x 2 mm

Delivery Contents:   One board and one 6 pin header 

16,99 €

  • Limited Availability
  • Ships within 1-3 days1